On Sat, May 25, 2002 at 05:04:12PM +1000, Lincoln Dale wrote:
> connect TX on one end to RX on the other and vice-versa.
> configure one of the routers for "clocking internal".
Could you please provide a bit more detail?
- Router platforms that support this?
- NM/PA's supporting this?
- IOS feature set/version required?
- Full snippet of a sample config?
I can't seem to get anywhere near making this work using 7200VXR with ATM
"WAN OC3 (SMI) Port adapter, 1 port" PA, running 12.2(7b) IP Plus image.
router(config)#int a2/0
router(config-if)#cloc?
% Unrecognized command
router(config-if)#int a2/0.1
router(config-subif)#clock?
% Unrecognized command
router(config-subif)#pvc 20/30
router(config-if-atm-vc)#clo
router(config-if-atm-vc)#clo?
% Unrecognized command
router(config-if-atm-vc)#no int a2/0.1
% Not all config may be removed and may reappear after reactivating the
sub-interface
router(config)#
*puzzled*. Our NSA also reckons you can't do it...
SY,
-- D.K.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:45 EDT