MTU issue as the label stack grows?
Matt.
-----Original Message-----
From: Duane de Witt [mailto:duane@uis.co.za]
Sent: 06 June 2002 08:24
To: 'cisco-nsp@puck.nether.net'
Subject: [nsp] MPLS TE
Hi Everyone
Has anyone come across a problem where when using multiple paths to a
destination with TE any traffic within a VRF doesn't get any return packets?
I have two TE tunnels going from one router to another using different
paths. Any normal traffic works fine, but as soon as I put the traffic in a
VRF I can see the icmp packets hit the destination and I can see the return
packets been sent, but they never reach the source router.
Thanks
Regards
Duane de Witt
Siemens Business Services
Tel. +27 11 652 7613
Fax. +27 11 652 2018
------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
==============================================================================
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:46 EDT