since it's net3 i wouldn't worry about it being down unless you need to make
a call...get this:
config t
service timestamp debug datetime msec
end
sh ver | i IOS
sh run int bri2/0
debug isdn q921
debug isdn q931
term mon
isdn call int bri2/0 xxxyyy !whatever phone number
if it doesnt pick up a TEI from the switch and place the call then you have
to worry.
josh
----- Original Message -----
From: "Muhammad Faisal Rauf Danka" <mfrd@attitudex.com>
To: <cisco-nsp@puck.nether.net>
Cc: <isp-routing@isp-routing.com>
Sent: Monday, June 10, 2002 5:03 AM
Subject: [nsp] BRI problem on 3640 series cisco router
> Dear Fellows
>
> We just purchased a 3640 router with 4-port BRI ( S/T interface ) card ,
we also have a 2522 router with one port BRI card , we have 4 isdn lines, 3
of then are siemens, our region is asia and here we are using the basic-net3
switch type , the problem we are facing is that when we plugin our bri line
in 3640 router's bri port its layer 1 and layer 2 don't show up but at same
moment when we plug the same ISDN line into our 2522 router's bri port its
working fine and shows every thing alright,
> i am giving you the status of both of my routers bri ports.
>
> [ 3640 bri port status ]
> ------------------------
> Global ISDN Switchtype = basic-net3
> ISDN BRI2/0 interface
> dsl 16, interface ISDN Switchtype = basic-net3
> Layer 1 Status:
> DEACTIVATED
> Layer 2 Status:
> Layer 2 NOT Activated
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Active dsl 16 CCBs = 0
> The Free Channel Mask: 0x80000003
> Number of L2 Discards = 0, L2 Session ID = 0
>
> [ 2522 bri port status ]
> ------------------------
> Global ISDN Switchtype = basic-net3
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-net3
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>
>
> Note: ISDN line is same.
>
> Someone suggested me to upgrade my IOS, others suggested that BRI
interface card might be faulty.
>
> Any help is appreciated in this manner.
>
>
> Regards,
> ---------
> Muhammad Faisal Rauf Danka
>
> Chief Technology Officer
> Gem Internet Services (Pvt) Ltd.
> web: www.gem.net.pk
>
> Vice President
> Pakistan Computer Emergency Responce Team (PakCERT)
> web: www.pakcert.org
>
> Chief Security Analyst
> Applied Technology Research Center (ATRC)
> web: www.atrc.net.pk
>
> _____________________________________________________________
> ---------------------------
> [ATTITUDEX.COM]
> http://www.attitudex.com/
> ---------------------------
>
> _____________________________________________________________
> Promote your group and strengthen ties to your members with
email@yourgroup.org by Everyone.net http://www.everyone.net/?btn=tag
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:46 EDT