Hi,
I am working on a Cisco router 1750, with the IOS version 12.1(2)T.
I logon this router via an ISDN line and using the “callback” feature.
I wrote this as a global configuration:
Username toto callback-dialstring 1234567890 password glouglou
And , also, my windows machine is configured to accept incoming call.
Now, using the same configuration on the BRI interface, I am trying to get an ISDN connection without the “callback” feature, and this failed. On the router I wrote this:
Username toto nocallback-verify password glouglou
And, I configured my windows machine to refuse incoming call.
So I would like to know why I simply couldn’t use this following BRI configuration without calling back the remote peers:
interface BRI0
ip unnumbered FastEthernet0
encapsulation ppp
dialer callback-secure
dialer idle-timeout 900
dialer enable-timeout 10
dialer load-threshold 1 either
dialer-group 1
isdn switch-type basic-net3
ppp callback accept
ppp authentication chap
ppp multilink
!
map-class dialer class1
dialer callback-server username
dialer-list 1 protocol ip permit
Regards,
Christophe
____________________________________________________________
Faites un voeu et puis Voila ! www.voila.fr
Avec Voila Mail, consultez vos e-mails sur votre mobile Wap.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:49 EDT