Yup, thanks for pointing that out, I was looking right past it.
Will check it out tonight.
Kent Tambling
kent@acceleration.net
System Administrator
www.acceleration.net
----- Original Message -----
From: "Lincoln Dale" <ltd@cisco.com>
To: "Kent Tambling" <Kent@acceleration.net>
Cc: <cisco-nsp@qual.net>
Sent: Wednesday, January 26, 2000 12:50 PM
Subject: Re: [nsp] WCCP 2 IOS compatibility
Kent,
it looks to me like you're running 12.0(7) and not 12.0(7)T.
a "show ver" will show you.
12.0 mainline only has WCCPv1.
cheers,
lincoln.
> Thanks Mike, Lincoln and Michael for helping me out.
>
> I'm running 12.0(7)T image for service providers as a test.
> System image file is "slot0:c7200-p-mz_120-7.bin"
>
> I've tried other variants as well, we're licensed for Layer 3 switching,
> that version didn't seem to work either. (The marker might
> not display in your email properly, its positioned at the start of
> the 'version' keyword and the 'web-cache' keyword).
>
>
> Here's what I get....... Doesn't this indicate I can't do version 2?
>
> gnv-rtr0#conf
> Configuring from terminal, memory, or network [terminal]?
> Enter configuration commands, one per line. End with CNTL/Z.
> gnv-rtr0(config)#ip wccp version 2
> ^
> % Invalid input detected at '^' marker.
>
> gnv-rtr0(config)#ip wccp web-cache
> ^
> % Invalid input detected at '^' marker.
>
> gnv-rtr0(config)#
>
>
> ----- Original Message -----
> From: "Lincoln Dale" <ltd@cisco.com>
> To: "Kent Tambling" <Kent@acceleration.net>; <cisco-nsp@qual.net>
> Sent: Monday, January 24, 2000 9:19 PM
> Subject: Re: [nsp] WCCP 2 IOS compatibility
>
>
> Hi Kent,
>
> At 20:41 23/01/00 -0500, Kent Tambling wrote:
> >Anybody know where I can find out which versions of 12.0 support
> >WCCP version 2.0 without booting each one? For the 7200 I tried
> >12.0(7)T multiple variants and they only do WCCP 1.0. I think I
> >need to back down to 12.0(5)T but was hoping someone here might
> >already know.
>
> IOS 12.0(7)T (for 72xx) most certainly does have WCCPv2.
> it also has WCCPv1 (which is explicitly enabled via "ip wccp version 1";
> WCCPv2 is the default otherwise).
>
> 12.0T since 12.0(5)T has had WCCPv2.
> 12.0 mainline only has (and will only ever have) WCCPv1.
> 12.0S currently only has WCCPv1. WCCPv2 images for 12.0S are currently in
> EFT (along with some other neat WCCP enhancements).
>
>
> cheers,
>
> lincoln.
>
> --
> Lincoln Dale Content Switching
> ltd@cisco.com Cisco Systems Inc. | |
> || ||
> +1 (408) 525-1274 bldg G, 170 West Tasman |||| ||||
> +61 (3) 9659-4294 San Jose CA 95134 ..:||||||:..:||||||:..
> +1 (713) 784-3003 <<
>
>
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT