On Thu, 3 Feb 2000, Rich Sena wrote:
> OK so I'm new to trunking and trying to set it up so that multiple vlans
> on a 6509 can share a subinterface with a 7513 - currently trying to use
> isl.
>
> Problem is that when I number the subinterface on the 7513 I lose
> connectivity. Basically what I am doing is moving the addresses to the
> subinterfaces, encapsulating isl, and setting a bridge group on the 7513
===================================^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you set bridge-group, then you switch off routing IP on this
interface, so you will have no connectivity over this interface to
router. You have to use IRB in order to include router into bridging
domain
> then stting trunking on the 6509 desirable
Check that 6509 is configured for ISL. This box can have 802.1q as
default trunking method...
>
> Any brainfood welcome...
---------------------------------------------------------
Basil (Vasily) Dolmatov CCIE #5347, CCNP-Security, CCDA
East Connection ISP, Moscow, Russia. (http://www.east.ru)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT