RE: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00

From: Rubens Kuhl Jr. (rkuhljr@uol.com.br)
Date: Mon Feb 07 2000 - 14:19:56 EST

Next message: Charles Sprickman: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Previous message: Deepak Jain: "Secondary Interface Limitations"
In reply to: Quan Nguyen: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Next in thread: Tony Tauber: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

> There is a feature called 'Simplex Ethernet Interfaces". An example
> can be found at: http://www.cisco.com/univercd/cc/td/doc/product/software/
> ios120/12cgcr/np1_c/1cprt2/1cip.htm#18783

Interesting to notice that the sample configuration uses the same IP
address, opposed to the same text in 11.1 manuals that use differente IP
addresses... curious...

Rubens Kuhl Jr.
rkuhljr@uol.com.br

Next message: Charles Sprickman: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Previous message: Deepak Jain: "Secondary Interface Limitations"
In reply to: Quan Nguyen: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Next in thread: Tony Tauber: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT