RE: Secondary Interface Limitations

• Next message: Sykes, Phil: "Re: [nsp] DS3 rtt"
• Previous message: Jesper Skriver: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
• Maybe in reply to: Deepak Jain: "Secondary Interface Limitations"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

 The box itself has a 255 interface (including subinterface) limit. This
may have been eliminated in 12.x release (Other folks, please help ;) I
haven't researched the 12.x release enough to know. This interface limit is
also eliminated through the use of Virtual Templates....
hth

--erik
-----Original Message-----
From: Deepak Jain
To: cisco-nsp@puck.nether.net
Sent: 2/7/00 12:52 PM
Subject: Secondary Interface Limitations

Is there a known limit to the number of secondary addresses one can have
on a Cisco PA-FE?

This question of course can be asked two ways, first is primary
interfaces
on sub interfaces, and the other is secondaries on the primary
interface.

I am most concerned with the latter, but would like to know about the
former as well, if there is any such limit.

Thanks,

Deepak Jain
AiNET

• Next message: Sykes, Phil: "Re: [nsp] DS3 rtt"
• Previous message: Jesper Skriver: "Re: [nsp] Half-duplex 10BASE-T interfaces of a Cisco 4x00"
• Maybe in reply to: Deepak Jain: "Secondary Interface Limitations"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT