> Although it may sound odd, this is most likely an example of
> auto-negotiation performing as designed.
Unfortunately, in my case this is not the cause of the problem. I have
the 7500/PA-FE-TX configured as a trunk, full duplex (speed is always
100 Mbps here, IOS won't let you configure 10 Mbps):
interface FastEthernet1/0/0
no ip address
no ip redirects
no ip directed-broadcast
no ip route-cache distributed
full-duplex
and the 3548XL is explicitly configured as 100 Mbps full duplex:
interface FastEthernet0/43
duplex full
speed 100
switchport trunk allowed vlan 1,201-203,1002-1005
switchport mode trunk
And I'm still getting CRC errors on the 3548XL.
Any other negotiation which might cause this problem (that can be turned
off)?
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT