At 10:40 26/06/00 -0400, Kellerman, Bert wrote:
Hmmm. Seems to be that older versions don't work, newer versions
work. ifSpeed for all FR subinterfaces stays at 2048000, inherited from
the master interface. Tried on:
11.2(7a)P - bad
12.0(9) - good
12.0(7) - good
11.2(16) - good
-Hank
> When you set the bandwidth of a subinterface with the 'bandwidth'
>command, the subinterface value is changed in ifSpeed. Maybe you are
>looking at the physical interface instead. From my testing and experience
>with IOS > 11.2 this command works fine on subinterfaces.
>Check out ifDescr to make sure the int in question is a subinterface.
>
>Bert Kellerman
>Network Management Engineer
>High Speed Access Corp.
>
>
>
>-----Original Message-----
>From: Hank Nussbacher [mailto:hank@att.net.il]
>Sent: Monday, June 26, 2000 7:21 AM
>To: cisco-nsp@puck.nether.net
>Subject: [nsp] MIB bandwidth of FR subinterface
>
>
>Where in the MIB would someone find the bandwidth value as set by the "band
>nn" command for a FR subinterface? ifSpeed just returns 2048000.
>
>Thanks,
>Hank
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:13 EDT