[nsp] Master/Slave RSP4

From: Steven Saner (ssaner@southwind.net)
Date: Tue Jul 18 2000 - 11:46:28 EDT

Next message: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Previous message: Nick Bastin: "[nsp] IGRP Spec."
Next in thread: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Reply: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Reply: Brian Wallingford: "Re: [nsp] Master/Slave RSP4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

I have what seems like a dumb question, but I can't seem to find the
answer.

On a 7505 with two RSP4s, one master, and one slave, how can you tell
which one (master or slave) is currently running from a telnet session
(I am not in front of the router)?

Thanks

-- 
==================================================================
Steven Saner                            SouthWind Internet Access, Inc.
ssaner@southwind.net                    Systems/Network Administrator
http://www2.southwind.net/~ssaner       http://www.southwind.net
                                        263-7963 Wichita  (800)525-7963

Next message: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Previous message: Nick Bastin: "[nsp] IGRP Spec."
Next in thread: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Reply: Miguel Angel Sanz: "Re: [nsp] Master/Slave RSP4"
Reply: Brian Wallingford: "Re: [nsp] Master/Slave RSP4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT