*********** REPLY SEPARATOR ***********
On 18/07/00 at 10:46 Steven Saner wrote:
>I have what seems like a dumb question, but I can't seem to find the
>answer.
>
>On a 7505 with two RSP4s, one master, and one slave, how can you tell
>which one (master or slave) is currently running from a telnet session
>(I am not in front of the router)?
>
"sh hard" will tell you which one is the slave:
...
Slave in slot 7 is running Cisco Internetwork Operating System Software
IOS (tm) GS Software (RSP-DW-M), Version 11.1(30)CC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
V111_30_CC_THROTTLE_BRANCH Synced to mainline version: 11.1(30)CA
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 01-Dec-99 00:03 by sharpd
Slave: Loaded from system
Slave: cisco RSP4 (R5000) processor with 262144K bytes of memory.
Regards,
Miguel
-----------
Miguel A. Sanz
Consultant / Project Manager E-mail: miguel.sanz@satec.es
SATEC, S.A. Tel: +34 917089000 / 912110300
Avda. de Europa, 34A Fax: +34 917089090 / 912110390
28023 Aravaca (MADRID) http://www.satec.es
SPAIN
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT