It would be nice if... it worked, because I've tried it ( with and
without cef ) in a 7200 I/O controller port and I can't find the ifTable
entries. Checked with snmp v1 and v2. Also, no entries found in
ifXTable.
Does anybody knows if the problem can be the FE port in I/O controller?
It seems that it's posible to configure 802.1q in this port, but perhaps
it's not supported.
Félix
P.S. I agree with the persistent ifIndex idea.
Roy wrote:
>
> It would be nice it it included
>
> snmp-server ifIndex persist
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s11/12sifidx.htm
>
> Félix Izquierdo wrote:
>
> > Hi!
> >
> > George Robbins wrote:
> > >
> > > Also, unless Cisco has seen the error of their ways and relented, there
> > > are no ifTable entries for ISL/dotQ sub-interfaces, and I'm not sure
> > > there a way to get at the equivlanet of "show vlan".
> > >
> >
> > ifTable entries for 802.1q subinterfaces ( I don't know for ISL ) are
> > avaible in 12.1(3)T. From 3600 release notes:
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/3600/rn3600t.htm#xtocid66835
> >
> > and also CEF support:
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/3600/rn3600t.htm#xtocid66815
> >
> > Félix
> >
> > ______________________________________________________________________
> > DATAGRAMA SERVICIOS GLOBALES IP
> > C/ Acer 30 Pho: +34 93 289 63 00
> > 08038 Barcelona ( SPAIN ) Fax: +34 93 223 12 66
> > mailto:fizquierdo@datagrama.net http://www.datagrama.net
> > ______________________________________________________________________
-- ______________________________________________________________________ DATAGRAMA SERVICIOS GLOBALES IP C/ Acer 30 Pho: +34 93 289 63 00 08038 Barcelona ( SPAIN ) Fax: +34 93 223 12 66 mailto:fizquierdo@datagrama.net http://www.datagrama.net ______________________________________________________________________
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT