Re: [nsp] Temp MIB call

From: Dave Bergum (bergum@mr.net)
Date: Mon Aug 07 2000 - 14:11:51 EDT

Next message: Jason Lim: "[nsp] dual-homed issue"
Previous message: Mike Gibbs: "[nsp] Temp MIB call"
In reply to: Mike Gibbs: "[nsp] Temp MIB call"
Next in thread: Marcio Pilotto: "RE: [nsp] RES: [nsp] Ethernet backup interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Here is what I use:

# CORE1.UPP
Directory[upp-temp]: temperature
Target[upp-temp]: 1.3.6.1.4.1.9.9.13.1.3.1.3.1&1.3.6.1.4.1.9.9.13.1.3.1.3.3:xxxx@yyyy
Title[upp-temp]: UPP hub room air temperature
PageTop[upp-temp]: <H1>UPP hub room air temperature</H1>
MaxBytes[upp-temp]: 40
Options[upp-temp]: gauge, growright
YLegend[upp-temp]: Degrees Celsius
ShortLegend[upp-temp]: deg C
WithPeak[upp-temp]: ymw
Legend1[upp-temp]: Incoming air temperature in degrees Celsius
Legend2[upp-temp]: Outgoing air temperature in degrees Celsius
Legend3[upp-temp]: Maximal 5 Minute air temperature
Legend4[upp-temp]: Maximal 5 Minute air temperature
LegendI[upp-temp]:  In:
LegendO[upp-temp]:  Out:

>>>>> On Mon, 7 Aug 2000 12:41:55 -0400 (EDT), Mike Gibbs <gibbs@servint.com> said:

  Mike> What is the MIB Var for finding the temp of the inlet air on a 7500? The
  Mike> ones I found in the mib tables I have from cisco give no answer back, nor
  Mike> can a walk the larger var.

Mike> Mike Gibbs

Next message: Jason Lim: "[nsp] dual-homed issue"
Previous message: Mike Gibbs: "[nsp] Temp MIB call"
In reply to: Mike Gibbs: "[nsp] Temp MIB call"
Next in thread: Marcio Pilotto: "RE: [nsp] RES: [nsp] Ethernet backup interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:14 EDT