last read:Time that BGP last read a message from this neighbor.
hold time:Maximum amount of time that can elapse between messages from the peer.
-tishi
On Wed, 23 Aug 2000, RSMANI wrote:
> Hi!
> I would like to know the exact meaning of the following lines when I issue the command
> "sh ip bgp neigh x.y.a.b"
>
> ------------Last read 00:00:03, hold time is 180, keepalive interval is 60 second---------------
> what is the meaning of the line last read.. I saw that this time keeps incrementing and suddenly falls back to 00:00:00 and again starts increasing..
> Also what is the meaning of hold time..
>
> Thanx
> in advance/
> Iyer rs
>
>
>
> BGP version 4, remote router ID 201.139.171.189
> BGP state = Established, table version = 58358, up for 4d06h
> Last read 00:00:03, hold time is 180, keepalive interval is 60 seconds
> Minimum time between advertisement runs is 30 Rcvd: 61562 (out of order: 0), with data: 55880, total data bytes: 37136191
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT