I am having a problem trying to enable sdr on an interface. This is on a
3640 with 12.1(2)T. I have also tried 12.0(7)T. Bug Navigator shows
nothing for this apparent bug, and I have opened a TAC case, but I thought
I would try the list to see if anyone may know something.
IOS seems to confuse "ip sap" and "ip sdr". Watch:
stargate#conf t
Enter configuration commands, one per line. End with CNTL/Z.
stargate(config)#int s2/0
stargate(config-if)#ip s?
sap sdr security split-horizon summary-address
stargate(config-if)#ip sap ?
listen Listen for sap packets on interface
stargate(config-if)#ip sdr ?
listen Listen for sap packets on interface
stargate(config-if)#ip sdr listen
stargate(config-if)#^Z
stargate#show runn int s2/0
Building configuration...
Current configuration:
!
interface Serial2/0
description T1 to Sprintnet
ip address 144.232.209.122 255.255.255.252
ip pim sparse-mode
ip route-cache flow
ip sap listen
end
there seems no way to enable sdr...........it instead thinks its doing
SAP.......
-----------------------------------------------
Brian Feeny, CCNA, CCDA signal@shreve.net
Network Administrator
ShreveNet Inc. (ASN 11881)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT