At 20:24 23/08/00 -0500, Brian wrote:
I have the same. But that enabled sdr in any event.
-Hank
>I am having a problem trying to enable sdr on an interface. This is on a
>3640 with 12.1(2)T. I have also tried 12.0(7)T. Bug Navigator shows
>nothing for this apparent bug, and I have opened a TAC case, but I thought
>I would try the list to see if anyone may know something.
>
>IOS seems to confuse "ip sap" and "ip sdr". Watch:
>
>stargate#conf t
>Enter configuration commands, one per line. End with CNTL/Z.
>stargate(config)#int s2/0
>stargate(config-if)#ip s?
>sap sdr security split-horizon summary-address
>
>stargate(config-if)#ip sap ?
> listen Listen for sap packets on interface
>
>stargate(config-if)#ip sdr ?
> listen Listen for sap packets on interface
>
>stargate(config-if)#ip sdr listen
>stargate(config-if)#^Z
>stargate#show runn int s2/0
>Building configuration...
>
>Current configuration:
>!
>interface Serial2/0
> description T1 to Sprintnet
> ip address 144.232.209.122 255.255.255.252
> ip pim sparse-mode
> ip route-cache flow
> ip sap listen
>end
>
>
>
>there seems no way to enable sdr...........it instead thinks its doing
>SAP.......
>
>-----------------------------------------------
>Brian Feeny, CCNA, CCDA signal@shreve.net
>Network Administrator
>ShreveNet Inc. (ASN 11881)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT