The confusion stems from labeling the virtual managment interface
"vlan1", while it may or may not have anything to do with the
vlan tagged as #1. 8-(
George
> To: xavier@bru-noc.net
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: Switch 2924XL & access-list
> From: sthaug@nethelp.no
>
> > I would like to protect a network connected to a router via a 2924XL switch.
> > Problem: I would like to apply the access-list on the switch and not on
> > the router (to avoid a high load).
> >
> > I defined an access-list and applied to the default VLAN (1). It does not
> > work! Is there a problem? Can I apply acl in a VLAN?
>
> The 2924XL is not a router. You can't use it to protect your network with
> IP access lists.
>
> Steinar Haug, Nethelp consulting, sthaug@nethelp.no
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:15 EDT