Hi,
Pete Welcher has a getconfig script to get running configs and place them into
a directory.
http://www.mentortech.com/welcher/scripts/index.htm
Several good scripts for cisco devices....
Jesper Skriver wrote:
> On Mon, Aug 28, 2000 at 11:32:39AM -0400, Basil Dolmatov wrote:
> >
> > Could anyone point me to some example of SNMP config management script
> > for Cisco routers/switches?
> >
> > I need possibility to initiate tftp transfer of config to router,
> > saving resulting config to NVRAM and tftp transfer resulting config from
> > router
> > to tftp-server.
> >
> > Proposed procedure in CISCO-CONFIG-COPY-MIB.my is quite complicated,
> > and I would prefer to clone my script from definitely working code, than
> > to reinvent the wheel..
>
> Here is what we use, hope you can use it ...
>
> /Jesper
>
> --
> Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456
> Work: Network manager @ AS3292 (Tele Danmark DataNetworks)
> Private: Geek @ AS2109 (A much smaller network ;-)
>
> One Unix to rule them all, One Resolver to find them,
> One IP to bring them all and in the zone to bind them.
>
> ------------------------------------------------------------------------
> Name: config.pl
> config.pl Type: Perl Program (application/x-perl)
> Description: config.pl
--
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
"Failure is not an option"
Gene Cranz, Apollo 13 mission
<><><><><><><><><><><><><><><><><><><><><><><><><><><>
Everett Dowd edowd@clark.net
CCIE #2409 http://www.clark.net/pub/edowd
Just bein' virtual =8^) Welcome to the 'net
|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:16 EDT