Hi,
we recently experienced that a newly deployed Cisco 7206VXR with a NSE-1
adapter installed rebooted itself.
The IOS version installed is 12.1(2)E (which is required for the NSE-1).
Have any other experienced problems with NSE-1 and IOS 12.1(2)E?
The NSE-1 documentation claims that both 12.1(2)E and 12.1(3)T supports
NSE-1, but the 12.1(3)T release notes doesn't say that support for NSE-1 is
included. What's correct?
Any experiences so far with Cisco 7206 and 12.1(3)T?
Output from the 'sh ver' command:
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.1(2)E, EARLY DEPLOYMENT
RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 21-Jun-00 09:29 by linda
Image text-base: 0x60008900, data-base: 0x61476000
ROM: System Bootstrap, Version 12.0(20000211:194150) [dperez-cosmos_e_ecc
106],
DEVELOPMENT SOFTWARE
xxxx uptime is 4 minutes
System returned to ROM by bus error at PC 0x6041089C, address 0x4 at
21:25:03 CE
T Sat Sep 16 2000
System restarted at 21:26:50 CET Sat Sep 16 2000
System image file is "slot0:c7200-js-mz.121-2.E.bin"
cisco 7206VXR (NSE-1) processor (revision A) with 122880K/8192K bytes of
memory.
Processor board ID 20399677
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2000KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
PXF processor tmc is running.
3 FastEthernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
- Vetle
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT