Hi
take a look at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
fun_c/fcprt3/fcd305.htm
I think this will help.
Rgds.
Andre
-----Original Message-----
From: Vinod Anthony Joseph Cherunni
Sent: Tue 26.09.2000 13:48
To: cisco-nsp@puck.nether.net
Cc:
Subject: [nsp] REG: Deployment of WCCP ver 2.0
Hi All,
I am on the process of configuring a Cisco router to pass Http, & other
standard protocol (ftp, real audio, nntp) redirects to a Cisco cache
engine using the WCCP ver 2.0 protocol.
I have connected the cache engine on to a common backbone segment, The
Ethernet interface of the Cisco router is also connected to the same
segment. Can somebody help me on what commands I need to give on the
router for enabling wccp ver 2.0 & enable redirects for the above
mentioned protocols.
Kindly advice
With warm regards,
Joseph.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:17 EDT