WCCP v2 is supported in 12.0 and higher.
----- Original Message -----
From: "Brian" <signal@shreve.net>
To: <Scott.Keoseyan@BroadWing.com>
Cc: <cisco-nsp@puck.nether.net>; <jared@puck.nether.net>
Sent: Friday, September 29, 2000 10:45 AM
Subject: Re: [nsp] WCCP and IOS 12.1
>
> Scott,
>
> I am pretty sure Squid 2.3 only supports WCCPv1. I had thought that Cisco
> did not release WCCPv2 openly yet.
>
> Brian
>
>
> On Fri, 29 Sep 2000 Scott.Keoseyan@BroadWing.com wrote:
>
> > Hello all...
> >
> > I upgraded a router in my lab to IOS 12.1(3a)T1 and my Squid cache no
longer
> > works. Any ideas what this error message might mean?
> >
> > 1w6d: WCCP-EVNT:???: Unknown msg_type 7 on Ethernet0/0/0 from
> > 192.168.103.100
> >
> > I did not make any changes to my squid.conf on my server... it was
working
> > very well with 12.0... I moved up to 12.1 to test a QoS tool from Cisco
that
> > wasn't supported in 12.0.
> >
> > This is (was) WCCP v2.0... I am running Squid v2.3(STABLE) on a Redhat
6.2
> > system.
> >
> > any help is appreciated...
> >
>
> -----------------------------------------------
> Brian Feeny, CCNP, CCDA signal@shreve.net
> Network Administrator
> ShreveNet Inc. (ASN 11881)
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT