RE: [nsp] WCCP and IOS 12.1

From: Scott.Keoseyan@BroadWing.com
Date: Fri Sep 29 2000 - 14:23:18 EDT


DOH! Apparently this was the issue... I missed it entirely even after I did
a 'sh ip wccp' and the version reported as 2.0... I knew my version of Squid
didn't support it... then I should have clued in because of the error
showing an unknown message type... it all makes sense now and it's working
fine.

Sorry for wasting bandwidth...

BTW - Should the router be defaulting to version 2 or is this some sort of
bug?

Scott

-----Original Message-----
From: Barry Raveendran Greene [mailto:bgreene@cisco.com]
Sent: Friday, September 29, 2000 1:40 PM
To: Scott.Keoseyan@broadwing.com; cisco-nsp@puck.nether.net
Cc: Lincoln Dale
Subject: RE: [nsp] WCCP and IOS 12.1

Hello Scott,

Did Lincoln post the WCCPv2 code for Squid? I know he is really busy right
now, but it is on his list of things to do.

If not, then it most likely is a issue with WCCP defaulting to WCCPv2. Can
you forward a IOS config - we can take this off line to fix.

Barry

> -----Original Message-----
> From: Scott.Keoseyan@BroadWing.com [mailto:Scott.Keoseyan@BroadWing.com]
> Sent: Friday, September 29, 2000 9:27 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] WCCP and IOS 12.1
>
>
> Hello all...
>
> I upgraded a router in my lab to IOS 12.1(3a)T1 and my Squid
> cache no longer
> works. Any ideas what this error message might mean?
>
> 1w6d: WCCP-EVNT:???: Unknown msg_type 7 on Ethernet0/0/0 from
> 192.168.103.100
>
> I did not make any changes to my squid.conf on my server... it was working
> very well with 12.0... I moved up to 12.1 to test a QoS tool from
> Cisco that
> wasn't supported in 12.0.
>
> This is (was) WCCP v2.0... I am running Squid v2.3(STABLE) on a Redhat 6.2
> system.
>
> any help is appreciated...
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT