RE: [nsp] 6400 fastethernet port

From: Robert Staats (
Date: Thu Oct 05 2000 - 04:05:38 EDT

I had the same problem with the 6400 running earlier IOS releases (12.0.5 I
think). It has definatley been fixed with 12.1.1, at least in our
environment. I am now able to connect to 2900s and 3500s using 100/FD.

Bob Staats

-----Original Message-----
From: Cho Man Fai []
Sent: Thursday, October 05, 2000 12:42 AM
Subject: [nsp] 6400 fastethernet port

Dear all,

A 6400 fast ethernet port cannot be connected as 100M to a catalyst 10/100
port. Even worse is that if we set the catalyst port to 100M/full duplex,
the connection is lost. We are currently configuring the port as 10M/full
duplex in catalyst.

interface FastEthernet0/0/0
 bandwidth 100000
 ip address

Do you have any idea to set the fast ethernet port to 100M in 6400?

Thanks in advance.

Kenneth Cho

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT