RE: [nsp] Maximum number of HSRP groups.....

From: Asbjorn Hojmark (Asbjorn@Hojmark.ORG)
Date: Tue Oct 10 2000 - 16:43:24 EDT

Next message: Asbjorn Hojmark: "RE: [nsp] OC-12 ATM interface for 7xxx series routers"
Previous message: George Matey: "[nsp] OC-12 ATM interface for 7xxx series routers"
In reply to: Desmarais, Jonathan: "RE: [nsp] Maximum number of HSRP groups....."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

> We have near to 150 HSRP groups in a CAT6500 environment and
> I can see us reaching 255 soon. Does HSRP traffic only exist
> on the segment (IP and physical) it is relative to? If this
> is the case then there should be no problem duplicating HSRP
> group numbers.

Actually, I always use the same HSRP group number (0, because
I don't enter one) for all interfaces, unless I need to run
HSRP for more than one address on a single interface. I've
experienced no problems with that.

-A

--
Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
Links : http://www.hojmark.org/networking/

Next message: Asbjorn Hojmark: "RE: [nsp] OC-12 ATM interface for 7xxx series routers"
Previous message: George Matey: "[nsp] OC-12 ATM interface for 7xxx series routers"
In reply to: Desmarais, Jonathan: "RE: [nsp] Maximum number of HSRP groups....."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:18 EDT