my bad... before the microcode is downloaded to the LC
--erik
-----Original Message-----
From: Erik L. Montemer [mailto:montemer@more.net]
Sent: Wednesday, October 18, 2000 15:39
To: Cisco NSP List
Subject: RE: [nsp] GSR TLB ???
TLB i believe is the boot loader for the line cards in the GSR, right before
the microcode boots.
--erik
-----Original Message-----
From: Eric Osborne [mailto:eosborne@cisco.com]
Sent: Wednesday, October 18, 2000 14:28
To: Deepak Jain
Cc: Kevin Gannon; Aaron Weintraub; Cisco NSP List
Subject: Re: [nsp] GSR TLB ???
> TransLation Bridge?
>
> Part of the SONET start-up sequence if I am not very much mistaken.
>
I couldn't find anywhere where we print a message remotely like 'TLB
INIT'. What's 'sh diag <slot>' look like, and what code are you on?
I very much doubt it's a SONET thing. I have no idea if 'TLB' is a
SONET state or not, but I bet that if 'TLB' really means anything,
it's setting up the TLB on the LC CPU, or something along those
lines.
eric
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:19 EDT