RE: [nsp] GSR TLB ???

From: Scott Whyte (swhyte@cisco.com)
Date: Wed Oct 18 2000 - 18:49:13 EDT


It Translation Lookaside Buffer initialization.

On Wed, 18 Oct 2000, Erik L. Montemer wrote:

> my bad... before the microcode is downloaded to the LC
>
> --erik
>
> -----Original Message-----
> From: Erik L. Montemer [mailto:montemer@more.net]
> Sent: Wednesday, October 18, 2000 15:39
> To: Cisco NSP List
> Subject: RE: [nsp] GSR TLB ???
>
>
> TLB i believe is the boot loader for the line cards in the GSR, right before
> the microcode boots.
>
> --erik
>
> -----Original Message-----
> From: Eric Osborne [mailto:eosborne@cisco.com]
> Sent: Wednesday, October 18, 2000 14:28
> To: Deepak Jain
> Cc: Kevin Gannon; Aaron Weintraub; Cisco NSP List
> Subject: Re: [nsp] GSR TLB ???
>
>
> > TransLation Bridge?
> >
> > Part of the SONET start-up sequence if I am not very much mistaken.
> >
>
> I couldn't find anywhere where we print a message remotely like 'TLB
> INIT'. What's 'sh diag <slot>' look like, and what code are you on?
>
> I very much doubt it's a SONET thing. I have no idea if 'TLB' is a
> SONET state or not, but I bet that if 'TLB' really means anything,
> it's setting up the TLB on the LC CPU, or something along those
> lines.
>
>
>
> eric
>

-Scott

--
Scott Whyte     swhyte@cisco.com | Hobbes: "What would *you* call the
Global Solutions Engineering     |          creation of the universe?"
Network Design Consultant        |
CCIE 3340                        | Calvin: "The Horrendous Space Kablooie!"



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:19 EDT