Scott
Thanks for that as a matter of interedt what does it do ??
Purely curious we havent hit a problem otherwise I would
be talking to the TAC. One of those over coffee things.
Thanks & Regards,
Kevin
----- Original Message -----
From: Scott Whyte <swhyte@cisco.com>
To: Erik L. Montemer <montemer@more.net>
Cc: Cisco NSP List <cisco-nsp@puck.nether.net>
Sent: Wednesday, October 18, 2000 11:49 PM
Subject: RE: [nsp] GSR TLB ???
>
>
> It Translation Lookaside Buffer initialization.
>
>
> On Wed, 18 Oct 2000, Erik L. Montemer wrote:
>
> > my bad... before the microcode is downloaded to the LC
> >
> > --erik
> >
> > -----Original Message-----
> > From: Erik L. Montemer [mailto:montemer@more.net]
> > Sent: Wednesday, October 18, 2000 15:39
> > To: Cisco NSP List
> > Subject: RE: [nsp] GSR TLB ???
> >
> >
> > TLB i believe is the boot loader for the line cards in the GSR, right
before
> > the microcode boots.
> >
> > --erik
> >
> > -----Original Message-----
> > From: Eric Osborne [mailto:eosborne@cisco.com]
> > Sent: Wednesday, October 18, 2000 14:28
> > To: Deepak Jain
> > Cc: Kevin Gannon; Aaron Weintraub; Cisco NSP List
> > Subject: Re: [nsp] GSR TLB ???
> >
> >
> > > TransLation Bridge?
> > >
> > > Part of the SONET start-up sequence if I am not very much mistaken.
> > >
> >
> > I couldn't find anywhere where we print a message remotely like 'TLB
> > INIT'. What's 'sh diag <slot>' look like, and what code are you on?
> >
> > I very much doubt it's a SONET thing. I have no idea if 'TLB' is a
> > SONET state or not, but I bet that if 'TLB' really means anything,
> > it's setting up the TLB on the LC CPU, or something along those
> > lines.
> >
> >
> >
> > eric
> >
>
> -Scott
>
> --
> Scott Whyte swhyte@cisco.com | Hobbes: "What would *you* call the
> Global Solutions Engineering | creation of the universe?"
> Network Design Consultant |
> CCIE 3340 | Calvin: "The Horrendous Space
Kablooie!"
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:19 EDT