PPP multilink with PAMCt3

From: Andy Waltz (andy@one.net)
Date: Thu Nov 09 2000 - 02:02:27 EST

Next message: Vladimir Litovka: "RE: NSE-1 experiences?"
Previous message: Scott.Keoseyan@BroadWing.com: "RE: [nsp] Connected routes missing after reboot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Good evening,

We've had a situation arise where we have a multi-t1 office that is
migrating off of their cisco to a Bay ARN. According to bay's
documentation the only way to setup multiple t1s is via
multilink. Obviously multilink can be setup on the cisco, but cisco's
documentation points to the fact that takes a hit on the cpu unless dCEF
is enabled on the interfaces. In light of all the problems with cef on
the MCt3 i'm hesitent to enable that.

Does anyone have any experience with either the cpu hit that unCEFed
multilink takes or if i'm wrong in my recollection that dCEF has problems
on the mct3? I know standard cef still has issues with mct3es but cant
recall about distributed.

The cisco on our side is a 7507, 12.09S, and a pamc2t3+ on a vip2-50.

Thanks for your assistance,

andy

----
Andy Waltz
Network Administrator
513-618-1000 Fax 513-618-2000
OneNet Communications
andy@one.net
----

Next message: Vladimir Litovka: "RE: NSE-1 experiences?"
Previous message: Scott.Keoseyan@BroadWing.com: "RE: [nsp] Connected routes missing after reboot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:20 EDT