with 18 subinterfaces on serial0 does that indicate that it is frame
relay ? What does show frame-relay pvc indicate about the dlci on
that interface ? Does cdp see anything on that interface ?
Parts of your config might be helpful.
Rick
Rick Burts, CCSI CCIE 4615 burts@mentortech.com
Mentor Technologies 240-568-6500 ext 6652
133 National Business Parkway 240-568-6515 fax
Annapolis Junction, Md 20701
Chesapeake Network Solutions has now become Mentor Technologies.
Mentor Technologies is a certified Cisco Training Partner and also
a Cisco Professional Services partner.
We offer most of the Cisco training courses.
We also offer training in Checkpoint Firewall software and
Fore Systems (now Marconi) and MicroMuse.
We also provide network consulting services including
design, management, and problem solving.
We have 24 CCIEs on our staff.
On Fri, 10 Nov 2000, Underkofler, Bob wrote:
> I have a 2600 with 18 sub interfaces under serial0. the 18th interface shows
> as up up, but I can't ping the local or remote serial IP 's.
> I'm stumped. If anyone could shed some light on this I'd appreciate it.
>
> Thanks,
>
> Bob Underkofler
> Zoot Enterprises
> bob@zootweb.com
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:20 EDT