Yes, I think you need 12.0(5)T or better with IP PLUS to enable 802.1q VLANs
on the 26xx. I know that 12.0(7)T IP PLUS works.
Regards,
Craig Mills
> -----Original Message-----
> From: Roy [mailto:garlic@garlic.com]
> Sent: Wednesday, 22 November 2000 12:03 PM
> To: Eric J. Merkel; cisco-nsp@puck.nether.net
> Subject: Re: [nsp] Doing VLANS with HP switch & Cisco Router
>
>
>
> You man have an older IOS that doesn't have 802.1q. I am
> running Version
> 12.1(2). Note that "ip route cache" and CEF don't work in
> most versions on
> 802.1q including that one.
>
> I defined things the way you propose. Make everything a sub-interface
> including the basic one. There are several reconfiguration
> commands for the
> basic interface which require you to remove all the
> sub-interfaces before they
> are allowed and you don't want to run into that. I did :-)
>
> "Eric J. Merkel" wrote:
>
> > I've got an HP procurve switch which is tied into a cisco
> 2621 router. Up
> > until now I have not had a need to do any VLANS on this
> switch but I do
> > now. My understanding is that I need to use 802.1q and have
> the routers
> > ethernet port on a switch port which does trunking for all
> the vlans.
> >
> > I've done this but for some reason when I create an
> ethernet sub-interface
> > it does not allow me to set an encapsulation type. Is there
> particular
> > version of the IOS that I need to do 802.1q encapsulation?
> Also, when doing
> > sub-interfaces, should I have the main ethernet interface
> with no ip on it
> > and have all vlan ip's on sub-interfaces kinda like frame relay?
> >
> > Sorry I am kinda a newbie to vlans. Any tips or pointers
> would be much
> > appreciated!
> >
> > Eric Merkel / MetaLink Technologies, Inc
> > ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
> > Email: merkel@metalink.net
> > Phone: 419-782-3472 or 888-999-8002
> > ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
>
**********************************************************************
This email may be confidential and/or privileged. Only the intended recipient
may access or use it. Any dissemination, distribution or copying of this email
is strictly prohibited. If you are not the intended recipient please notify us
immediately by return email and then erase the email.
We use virus scanning software but exclude all liability for viruses
or similar in any attachment
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:21 EDT