It _is_ a requirement. MIB OID in full notation _is_ starting from dot,
reperesenting the root of MIB-tree...
Because of its unevitable presence this ot is often omitted when
quoting OIDs in conversation ;)
--------------------------------------------------------
Basil (Vasily) Dolmatov, CCIE #5347, CCNP-Security, CCDA
LightCom Corp. http://www.lightcom.ru
> -----Original Message-----
> From: Laszlo PAL [mailto:laszlo.PAL@nextra.hu]
> Sent: Sunday, November 26, 2000 4:07 PM
> To: Subodh Nijsure; rsmith@firstnet.co.uk
> Cc: cisco-nsp@puck.nether.net
> Subject: RE: [nsp] a little help is required please
>
>
> I'm playing with the same in mrtg but for these oids there is no results.
> When I query by snmpwalk there is also no result. If I add an
> extra . at the
> beginning of the oid it is working fine. Is this possible to adding this
> extra . in my mrtg config is a requirement?
>
> Thank you
> Laszlo
>
>
> -----Original Message-----
> From: Subodh Nijsure [mailto:subodh@best.com]
> Sent: Thursday, November 09, 2000 4:38 PM
> To: rsmith@firstnet.co.uk
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] a little help is required please
>
>
> > Hi All,
> >
> > I was once told the mib in dotted decimal format for the total amount of
> > lines on a 5300 and the total amount of lines used on a 5300.
> >
> > unfortunately during transit this has been lost.
> >
> > if any one can help it will be much appreciated...
> >
> > it is only to use mrtg to graph ports in use on the 5300
>
> May be this url will help?
>
> ftp://ftp.cisco.com/pub/mibs/oid/CISCO-MODEM-MGMT-MIB.oid
>
> "cmSystemModemsAvailable" "1.3.6.1.4.1.9.9.47.1.1.7"
> "cmSystemModemsUnavailable" "1.3.6.1.4.1.9.9.47.1.1.8"
> "cmSystemModemsOffline" "1.3.6.1.4.1.9.9.47.1.1.9"
> "cmSystemModemsDead" "1.3.6.1.4.1.9.9.47.1.1.10"
>
> In MRTG you will have to add .0 at end.
>
> /Subodh
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:22 EDT