Error Message
%MUESLIX-1-STOPFAIL: Mx serial, [chars] Stop Failed at [chars]
Explanation The Mx serial port adapter has failed to respond to a request
to disable an interface.
Recommended Action Copy the error message exactly as it appears on the
console or in the system log, call your Cisco technical support
representative, and provide the representative with the gathered information.
Error Message
%MUESLIX-1-FAILURE_CAUSE: [chars]: [chars][chars]: 0x[hex], 0x[hex]
Explanation A failure involving the port adapter has occurred.
Recommended Action Copy the error message exactly as it appears on the
console or in the system log. Issue the show tech-support command to gather
data that may provide information to determine the nature of the error. If
you cannot determine what condition caused the "STOPFAIL/STARTFAIL" error
message text, call your Cisco technical support representative and provide
the representative with the gathered information.
At 03:40 PM 12/8/00 -0500, Dragan Dincic - Dine wrote:
>00:28:34: %MUESLIX-1-STOPFAIL: Mx serial, Serial1/0 Stop Failed at disable
>port
>
>00:28:34: %MUESLIX-1-FAILURE_CAUSE: Serial1/0: TPU0 DMA Status address and
>value
>
>
>Dragan Dincic – Dine
>Technical Manager
>Swift Global (K) Ltd.
><mailto:dine@swiftkenya.com>dine@swiftkenya.com
>=================
>P.O. BOX 42164<?xml:namespace prefix = o ns =
>"urn:schemas-microsoft-com:office:office" />
>Nairobi, KENYA
>~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Tel : +254 2 545 533
>Fax : +254 2 545 534
>~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:23 EDT