pVLAN

• Next message: Dana McIntosh: "[nsp] CGMP leave vs. HSRP"
• Previous message: Shane Amante: "Re: [nsp] Reg. OSPF Stub, Totally Stubby areas"
• Next in thread: Max Gargani: "Re: pVLAN"
• Maybe reply: Max Gargani: "Re: pVLAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi all,

I'm trying to configure a pvlan using a c6009 and a c3524

I configured a primary vlan and an isolated vlan on c6009. attached the
isolated vlan to primary and binded both on a NON trunk port where it's
connected to c3524. Then I've mapped the pvlan on msfc (15/1)

set vlan 200 pvlan-type primary
set vlan 201 pvlan-type isolated
set pvlan 200 201 2/25
set pvlan mapping 15/1

Then I configured the vlan 200 on msfc side of c6009

The fas0/24 on c3524 is connected to port 2/25 on c6009.

I configured a mode access vlan on c3524. VLAN 201 with an IP of the same
subnet of that one on VLAN 200 on c6009.

I see the CDP but I can't able to ping the address.

Any help?

TIA,
Max

• Next message: Dana McIntosh: "[nsp] CGMP leave vs. HSRP"
• Previous message: Shane Amante: "Re: [nsp] Reg. OSPF Stub, Totally Stubby areas"
• Next in thread: Max Gargani: "Re: pVLAN"
• Maybe reply: Max Gargani: "Re: pVLAN"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:23 EDT