please provide a "sh ver" that corresponds to the below error message.
this is a software bug. and we will need to decode the the traceback to see
the cause of this error message. i would recommend opening a tac case
to work this issue if you have access to the Cisco TAC.
regards
.siva
>
> Hi,
> On 12.0(14)S, and previously on 12.0(9), enabling "ip verify unicast
> reverse-path" with an access list on 7206 serial intefaces causes:
>
> %SYS-3-INVMEMINT: Invalid memory action (free) at interrupt level
> -Traceback= 6046257C 60540C70 6053F2A4 60541218 6034C078 6035D670 603772C4 600ED1B8 600F4780 600F60A8 600F8810
>
> The access list only permits all and logs, since I just want to "catch" packets
> that are asymmetric, or maybe DoS.
>
> Known problem? Is it the logging perhaps?
>
>
> --
>
> http://www.internet.org.ph Internet and ISP's in the Philippines
> http://www.ASARproject.org Artists for Social Action and Response
>
> GSM Mobile: +63-917-810-9728
>
>
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT