Re: [nsp] Finding broadcast source

• Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: 36xx Router"
• Previous message: Blake Fithen: "[nsp] Finding broadcast source"
• Maybe in reply to: Blake Fithen: "[nsp] Finding broadcast source"
• Next in thread: Siva Valliappan: "Re: [nsp] Finding broadcast source"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

I'd look at from the other direction. One of your VCI/VPI pairs
doesn't exist, review what you have listed on atm3/0.6 and see
which PVC aren't pinginable or aren't accumulating any input
packets.

I'm not sure the addr= trnaslates to an IP address, but take a look
at where host=0xC7F0B537 -> 199.240 181.55 is being routed to..

                                                        George

> From: Blake Fithen <fithen@NetworksPlus.com>
> To: "'cisco-nsp@puck.nether.net'" <cisco-nsp@puck.nether.net>
> Subject: [nsp] Finding broadcast source
>
> Hi list, having trouble finding a source of what I believe
> is a broadcast related problem. If I do a "debug atm error"
> I get a ton of:
>
> Dec 29 13:24:58.776 cst: ATM(ATM3/0): Encapsulation error1, link=7,
> host=C7F0B537
> Dec 29 13:24:58.968 cst: ATM(ATM3/0.6) Send:Error in encapsulation, No VC
> for address 0x613DE328
> Dec 29 13:24:58.968 cst: ATM(ATM3/0.6) Send:Error in encapsulation, No VC
> for address 0x613DE328

• Next message: Vinod Anthony Joseph Cherunni: "[nsp] REG: 36xx Router"
• Previous message: Blake Fithen: "[nsp] Finding broadcast source"
• Maybe in reply to: Blake Fithen: "[nsp] Finding broadcast source"
• Next in thread: Siva Valliappan: "Re: [nsp] Finding broadcast source"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT