[nsp] REG: 36xx Router

From: Vinod Anthony Joseph Cherunni (vac@dsqworld.com)
Date: Sat Dec 30 2000 - 05:32:20 EST


Dear All,

Thanks once again for all your help in clearing my queries. I am trying to
figure out whether the Cisco 3662 router can be configured with the 2
Port Channelized E1 Card (NM-2CE1B) & a 30 port Digital Modem Module
(NM-30DM) to suport a combination of Analog / ISDN BRI users logging onto
my network through an E1/ PRI circuit terminating on the NM-2CE1B ports
of my access router.

If the above is possible, Apart from port densities, Is there any other
dfference in terms of functionality & features between the AS-5300 as
compared to the above given Cisco 3662 configuration.

Pls find below the configuration of Cisco 3662 worked out on the Cisco web
site.

Product Description Quantity
CISCO3662-AC-CO Dual 10/100E Cisco 3660 6-slot CO Mod Router-AC w/ Telco
SW 1
CAB-ACE Power Cord Europe 2
S366T-12101T Cisco 3660 Series IOS TELCO FEATURE SET 1
MEM3660-64U96D 64 to 96 MB factory SDRAM upgrade for Cisco 3660 1
MEM3600-16FC 16Mb Flash card for the Cisco 3600 1
NM-2CE1B 2-Port Channelized E1/ISDN-PRI Balanced Network Module 1
NM-30DM 30 Port Digital Modem Network Module 1
MMTL-3600-30 Modem management technology license for 3600 1
PWR-3660-AC Redundant AC Power Supply for Cisco 3660 1

Kindly advice me.

With warm regards,
Vinod.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:24 EDT