Good Day to you all,
I would just like to seek your expertise on how I could implement a set-up
for my customers.
I am providing a shared access of 1:4 for my customers for every single pipe
link. Theoretically, our set-up should work like this: if I have a pipe of
64Kbps upstream, with the 1:4 contention ratio, I would be able to service
up to four 64Kbps customers. Basically, they are guaranteed 1/4 (25%) of
their subscribed bandwidth with us and has a possibility of burst to a 100%
on the occassion that the other 3 customers are not using link.
However, as we were implementing it, customers traffic are not symmetric
than we expect. What happened was, one of the 4 sharing customers would
basically eating up the whole pipe with the others having difficulty passing
through. We tried implementing CAR on these customer but all it does is peg
their bandwidth and does not give the ability to burst during non-peak.
Is there a proper set-up or configuration that we could implement to achieve
the desired specs for our service. Hope I hear soon from you guys.
More power!!!
Best regards,
Armand Ramos
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT