Re: [nsp] IOS 12.0(14)S1/S2 on RSP-platforms (7x00)

From: Jared Mauch (jared@puck.nether.net)
Date: Mon Jan 15 2001 - 18:18:33 EST

Next message: Freeserve (E-mail): "PRI channels into a VRF."
Previous message: Larry Rosenman: "Re: [nsp] IOS 12.0(14)S1/S2 on RSP-platforms (7x00)"
In reply to: Larry Rosenman: "Re: [nsp] IOS 12.0(14)S1/S2 on RSP-platforms (7x00)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On Mon, Jan 15, 2001 at 04:41:04PM -0600, Larry Rosenman wrote:
> * Jared Mauch <jared@puck.nether.net> [010115 16:24]:
> > If you have vip2-50 w/ CT3 use 14S2 otherwise I'd wait until 15S is
> > released as there is a lot of good stuff going in as compared to 14S
>
> Such As? I'm waiting for a stable release to pick up the new Unicast
> RPF stuff.

I believe that SSM (Single-Source Multicast) is going into
it amongst other features.

> I have mostly clear channel DS3's, not CT3's.

My problem recently has been that we were waiting on a ct3
bug to be fixed on the rsp platform to have the ability to
uniformly deploy software images w/ a particular featureset.

- Jared

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.
END OF LINE  | Manager of IP networks built within my own home

Next message: Freeserve (E-mail): "PRI channels into a VRF."
Previous message: Larry Rosenman: "Re: [nsp] IOS 12.0(14)S1/S2 on RSP-platforms (7x00)"
In reply to: Larry Rosenman: "Re: [nsp] IOS 12.0(14)S1/S2 on RSP-platforms (7x00)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT