NAT using only a real interface?

From: Salvatore Privitera (sprivitera@telvia.it)
Date: Wed Jan 17 2001 - 19:34:55 EST

Next message: Andrew: "Re: NAT using only a real interface?"
Previous message: Thomas Kernen: "[nsp] Fixed Wireless WT-2750"
Next in thread: Andrew: "Re: NAT using only a real interface?"
Reply: Andrew: "Re: NAT using only a real interface?"
Maybe reply: Martin, Don: "RE: NAT using only a real interface?"
Reply: Asbjorn Hojmark: "RE: NAT using only a real interface?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

HI all,

We have Cisco 2600 connected to internet using public IP 123.123.123.1/24
address on the eth0/0 port.

Is possible, using only that ethernet port, create a intranet LAN using
192.168.1.0/24 space and natting on o the ethernet interface? How I set ip
nat inside/ ip nat outside setting? I need to create loopback or null
interface to do so?

.salvo

Next message: Andrew: "Re: NAT using only a real interface?"
Previous message: Thomas Kernen: "[nsp] Fixed Wireless WT-2750"
Next in thread: Andrew: "Re: NAT using only a real interface?"
Reply: Andrew: "Re: NAT using only a real interface?"
Maybe reply: Martin, Don: "RE: NAT using only a real interface?"
Reply: Asbjorn Hojmark: "RE: NAT using only a real interface?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT