You do realize that the MSFC's do not synchronize configurations like the
superivisor modules. If you want redundancy at the Layer 3 level you must
use HSRP on the MSFC's for your VLANs. Keep in mind the MSFC's are always
active and are not in standby mode even though the supervisor module it
resides on may be in standby.
Patrick Greene
-----Original Message-----
From: Desmarais, Jonathan [mailto:JDesmarais@colt-telecom.com]
Sent: Wednesday, January 17, 2001 3:50 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Unusual Cat 6509 MSFC Problem
After failing the Sup modules over to the standby, as a test, the layer 3
connectivity to the Switch seems to be fried. On the Switch console we can
see the cdp entries for all the cisco devices directly connected to it, but
we cannot ping any of these devices from the MSFC card.
Any Idea's?
Jon
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
**********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:25 EDT