Re: [nsp] ATM PVC info via SNMP

From: Vladimir Litovka (doka@kiev.sovam.com)
Date: Wed Feb 07 2001 - 14:01:39 EST

Next message: Rick Smith: "[nsp] RTR with a Cisco router"
Previous message: Luan M Nguyen: "Re: [nsp] VPNSC software"
In reply to: Joerg Forstreuter: "Re: [nsp] ATM PVC info via SNMP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On Wed, 15 Nov 2000, Joerg Forstreuter wrote:

> Take a look at CISCO-AAL5-MIB.my. Here you find
> cAal5VccInOctets => 1.3.6.1.4.1.9.9.66.1.1.1.1.3
> cAal5VccOutOctets => 1.3.6.1.4.1.9.9.66.1.1.1.1.4

These variables show quite incorrect values. I'm using 7206 w/ NSE-1 and
PA-A3-OC3 card under 12.1(5)T1 and see big difference between traffic on
FastEthernet0/0 (from sh in fa0/0 - it is about 7Mbps) and accordingly on
ATM (from SNMP - it is about 300Kbps). Router configured so, that all
incoming from ATM traffic goes into FastEthernet, so I expect same speeds
on both.

Also, in 'sh in atm' traffic counters change time to time, not
continuously, as on FastEthernet.

Question as usual: are there features or bugs?

-- 
Vladimir Litovka <doka@kiev.sovam.com>  | "I've seen the future and it's
 . Phone/Fax: +380 44 4900111           |  Cisco switches!"
 . ICQ/none, talk/none ;)               |                    Cat Alyst

Next message: Rick Smith: "[nsp] RTR with a Cisco router"
Previous message: Luan M Nguyen: "Re: [nsp] VPNSC software"
In reply to: Joerg Forstreuter: "Re: [nsp] ATM PVC info via SNMP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:27 EDT