Re: [nsp] ATM PVC info via SNMP

From: Joerg Forstreuter (forstreuter@belwue.de)
Date: Wed Nov 15 2000 - 09:47:50 EST


On Mon 2000-11-13 (01:33), Charles Sprickman wrote:
> Hello,
>
> Where can I find OIDs for ATM pvc stats? I'm looking for basic info such
> as up/down status, bytes in/out and hopefully some basic OAM info. Is it
> possible to reference this info by VPI/VCI, or do I need to walk some
> index table first?

No you don't.

Take a look at CISCO-AAL5-MIB.my. Here you find
cAal5VccInOctets => 1.3.6.1.4.1.9.9.66.1.1.1.1.3
cAal5VccOutOctets => 1.3.6.1.4.1.9.9.66.1.1.1.1.4

you should read this variables from atminterface.vpi.vci
you can check atminterface for ifOperStatus.

atminterface is what you get for ifDescr => ATMx/0.y-aal5 layer

Hth,

        Joerg Forstreuter

-- 
-- Joerg Forstreuter, ------------------ mailto:forstreuter@belwue.de --
   BelWue-Koordination                                Tel: 0711/685-2509
   Rechenzentrum der Universitaet Stuttgart           Fax: 0711/678-8363
-- Allmandring 3A, 70550 Stuttgart ------------ http://www.belwue.de/ --



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:21 EDT