Okay, okay. I know I should know this but...
I'm migrating a data center and need to temporarily split up a /20 into
chunks. Naturally, I normally had the /20 aggregated. Problem is, I need
it NOT to aggregate for the few weeks during the move. Already made
arrangements with the upstreams. However, my problem is that even though I
removed the aggregate statements and soft bumped the bgp, the route is still
aggregating. I'm researching this in other resources (translated, the ole
cisco press "inet arch"), but I've already got one provider accepting the
split and you know the other one is going to kick in before I've found the
answer.
Any assist will be greatly appreciated!!!
---------------------------------------------------------------------
Best regards,
Karyn Ulriksen
Network Operations Manager
PublicHost, A VitalStream Company
1 Jenner, Suite 100
Irvine, California 92618 USA
Phone: (949) 743-2000
email: kulriksen@publichost.com
URL: http://www.publichost.com
===========================================
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:32 EDT