Dear Shiva,
Thanks for your reply.
a) I am able to ping the atm interface from win98 client
b) I am also able to ping the fast ethernet port of 7200 from win98 client
c) I am not able to ping local lan of 7200. That means this could be a
switiching issue or what else.
How do work around with this???
best regards
akber
----- Original Message -----
From: "Siva Valliappan" <svalliap@cisco.com>
To: "akber" <akber@shabakah.com>
Cc: "cisco-nsp" <cisco-nsp@puck.nether.net>
Sent: Sunday, March 25, 2001 2:38 AM
Subject: Re: PPPoE PROBLEM OVER ATM ON 7200......12.1(5)T5
> sorry i didn't reply to earlier e-mails on this thread. been caught up
> on a number of issues. we need to eliminate if this problem is a
switching
> issue on the router, or a problem with the routes on the end host.
> can you do the following:
>
> a) ping from the win 95 client to the ATM interface
> (we already know it works, but just to prove connectivity is up as we
> test)
>
> b) ping the lan interface ip of the 7200 from the client
>
> if we fail, then we know the end device probably doesn't have the
> correct default gateway or has incorrect routes.
>
> if we succeed, proceed to step (c)
>
> c) ping some other device off the local lan of the 7200.
>
> if we succeed then we know there is no switching problem on the 7200,
> and it's unlikely to be a routing issue on the client, so we will
> need to proceed further out on the problem.
>
> if we fail, verify that the device being pinged knows how to get back
to
> the win '95 box.
>
> in event of failure, one test to do is to do a ping with options
> (e.g. record route). if that succeeds, it's likely to be a interrupt
> level switching issue on the router.
>
> btw i would urge you to open a TAC case if possible as the TAC engineers
> are experienced with working on such type of problems, and will be able
> to help you.
>
> regards
> .siva
>
>
>
> >
> > This is a multi-part message in MIME format.
> >
> > ------=_NextPart_000_00F1_01C0B3B3.7B1E8710
> > Content-Type: text/plain;
> > charset="iso-8859-1"
> > Content-Transfer-Encoding: quoted-printable
> >
> >
> > Dear All,
> > I am runinng PPPoE over ATM on 7200. After making the configuration on =
> > my router for a vpdn and virtual template for pppoe protocol support I =
> > make a win98 client to connect via ADSL. The client is able to connect =
> > and get authenticated. It also receives a IP address from my pool of IP.
=
> > The win98 client can ping my router and my router can ping the client =
> > but the client cannot ping any of my IP like DNS or proxies and it =
> > cannot even go on internet.=20
> > Do I have to configure some routing.
> > Or I have to make a seperate pool of ip for ppp and pppoe do some =
> > routing associated with it.
> > I am runinng cisco ios Version 12.1(5)T5
> > Here is my configuration
> >
> > vpdn-group 2
> > accept-dialin
> > protocol pppoe
> > virtual-template 2 =20
> >
> > interface ATM3/0.17 point-to-point
> > pvc 6/100
> > encapsulation aal5snap
> > protocol pppoe =20
> >
> > interface Virtual-Template2
> > ip unnumbered FastEthernet0/0
> > ip mtu 1492
> > no ip route-cache cef
> > peer default ip address pool default
> > ppp authentication pap =20
> >
> >
> > ADSL is a new concept here and there is hardly any support for it and we
=
> > are still under test phase for ADSL=20
> >
> > so please help
> > best regards
> > akber
> >
> > ------=_NextPart_000_00F1_01C0B3B3.7B1E8710
> > Content-Type: text/html;
> > charset="iso-8859-1"
> > Content-Transfer-Encoding: quoted-printable
> >
> > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > <HTML><HEAD>
> > <META http-equiv=3DContent-Type content=3D"text/html; =
> > charset=3Diso-8859-1">
> > <META content=3D"MSHTML 5.50.4030.2400" name=3DGENERATOR>
> > <STYLE></STYLE>
> > </HEAD>
> > <BODY bgColor=3D#ffffff>
> > <DIV><FONT face=3DArial size=3D2></FONT><FONT face=3DArial =
> > size=3D2></FONT><BR>Dear=20
> > All,</DIV>
> > <DIV>I am runinng PPPoE over ATM on 7200. After making the configuration
=
> > on my=20
> > router for a vpdn and virtual template for pppoe protocol support I make
=
> > a win98=20
> > client to connect via ADSL. The client is able to connect and get =
> > authenticated.=20
> > It also receives a IP address from my pool of IP. The win98 client can =
> > ping my=20
> > router and my router can ping the client but the client cannot ping any
=
> > of my IP=20
> > like DNS or proxies and it cannot even go on internet. </DIV>
> > <DIV>Do I have to configure some routing.</DIV>
> > <DIV>Or I have to make a seperate pool of ip for ppp and pppoe do some =
> > routing=20
> > associated with it.</DIV>
> > <DIV>
> > <DIV><FONT face=3DArial size=3D2>I am runinng cisco ios Version=20
> > 12.1(5)T5</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>Here is my configuration</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > <DIV><FONT face=3DArial size=3D2>vpdn-group =
> > 2<BR> accept-dialin<BR> =20
> > protocol pppoe<BR> virtual-template 2 </FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > <DIV><FONT face=3DArial size=3D2>interface ATM3/0.17=20
> > point-to-point<BR> pvc 6/100<BR> encapsulation=20
> > aal5snap<BR> protocol=20
> >
pppoe =20
> > </FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > <DIV><FONT face=3DArial size=3D2>interface Virtual-Template2<BR> ip
=
> > unnumbered=20
> > FastEthernet0/0<BR> ip mtu 1492<BR> no ip route-cache=20
> > cef<BR> peer default ip address pool default<BR> ppp =
> > authentication=20
> > pap </FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > <DIV><FONT face=3DArial size=3D2>ADSL is a new concept here and there is
=
> > hardly any=20
> > support for it and we are still under test phase for ADSL </FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2></FONT> </DIV>
> > <DIV><FONT face=3DArial size=3D2>so please help</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>best regards</FONT></DIV>
> > <DIV><FONT face=3DArial size=3D2>akber</FONT></DIV></BODY></HTML>
> >
> > ------=_NextPart_000_00F1_01C0B3B3.7B1E8710--
> >
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT