On Sun, Mar 25, 2001 at 10:05:57PM +0800, eric chan wrote:
> dear all,
>
> i have applied rate limit for incoming icmp on one of my
> interface, however, i found that there is 40% packet lost when the rate
> limit is active, i set the average rate to 40000, burst rate to 32000,
> but there is still < 10% packet lost ,
Can we see your config, please. Sounds like your CAR access list matching
something wrong. ;) Please take anote that CAR is effective when there are
many conversations active on the link, e.g. on the high speeds. On low
speeds it's going to create nothing but headaches.
>
> is it normal ??
>
> eric
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
---end quoted text---
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT