On Tue, Mar 27, 2001 at 05:08:37PM +0100, Christian Reichert wrote:
> Hi !
>
> Yeah, that's exactly the feature I'm looking for. Do you know if it will be
> supported via the 1G interface in the future or is no support for that
> interface planned at all ?
As far as I know, support is not planned. Have your account team
check with the GSR product managers, though, if you have specific
requirements for 1xGE 802.1Q->VLAN mapping.
eric
>
> Cheers,
> Chris
>
> -----Original Message-----
> From: Eric Osborne [mailto:eosborne@cisco.com]
> Sent: 27 March 2001 16:34
> To: Christian Reichert
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] GSR 12000 ISL to cat 6009 & mpls
>
>
> On Tue, Mar 27, 2001 at 05:43:47AM -0500, Christian Reichert wrote:
> > Hi !
> >
> > I want to do ISL over a Gigabit Ethernet from a GSR 12000 to a Catalyst
> > 6009.
> > On the GSR, each Subinterface will be in a different VFR about 50
> > Subinterfaces).
> >
> > The Cisco is not very clear if this szenario is supported on the GSR1200
> > with Gig Ethernet. has anybody a similar configuration working ?
>
> There's 2 kinds of GE cards for the 12000 - the 1xGE and the 3xGE.
>
> What you want is a feature we're calling "802.1q to VRF mapping".
>
> It is
>
> - not supported on the 1xGE
> - planned to be supported on the 3xGE in 12.0(16)ST. Estimated due
> date for 16ST is currently end of April/beginning of May.
>
>
>
>
>
> eric
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT