Re: [nsp] ip route-cache flow per subinf allowed?

• Next message: Charles Sprickman: "[nsp] OSPF quickie"
• Previous message: Eric Osborne: "Re: [nsp] GSR 12000 ISL to cat 6009 & mpls"
• In reply to: Hank Nussbacher: "[nsp] ip route-cache flow per subinf allowed?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hank Nussbacher wrote:
>
> Can one set "ip route-cache flow" per subinterface? I am trying to set it
> on an atm subif and it isn't working. It only works on the interface itself:
>
> cisco(config)#int atm1/0.20
> cisco(config-subif)#ip route-cache ?
> same-interface Enable fast-switching on the same interface
> <cr>
>
> cisco(config-subif)#ip route-cache flow
> ^
> % Invalid input detected at '^' marker
>
> System is a 7200VXR running 12.0(7)S1.
>
> Thanks,
> Hank

hank,

ip route-cache speaks to physical interface and as such can only be turned on at
the interface level not on a sub-if.

piranha...

-- 
------------------------------------------------------
 "My Lord Tzu, running away is the first martial tao"
 Sigun Yuen - Sifu and Archery Commander for Armies
 of the Wu Dynasty General Sun Tzu
------------------------------------------------------

• Next message: Charles Sprickman: "[nsp] OSPF quickie"
• Previous message: Eric Osborne: "Re: [nsp] GSR 12000 ISL to cat 6009 & mpls"
• In reply to: Hank Nussbacher: "[nsp] ip route-cache flow per subinf allowed?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:33 EDT