yep,
That's what I did and it works fine.
Thanks A lot
Alban
George Robbins wrote:
> Some of the lamer switches only support port-based vlans, i.e. you
> can segment the switch into multiple groups, but you need a separate
> uplink for each group.
>
> If you go onto the cisco website and look up the release notes for
> the catalyst software, there's a table that shows what release a
> given switch can be upgraded to and what it supports in the way
> of vlans and/or trunks.
>
> George
>
> > From cisco-nsp-request@puck.nether.net Wed Mar 28 14:30:20 2001
> > Resent-Date: Wed, 28 Mar 2001 10:58:08 -0500
> > Received-Date: Wed, 28 Mar 2001 10:55:54 -0500
> > From: "Desmarais, Jonathan" <JDesmarais@colt-telecom.com>
> > To: "'Alban Dani'" <adani@stevens-tech.edu>, cisco-nsp@puck.nether.net
> > Subject: RE: [nsp] two vlans in 2900 switches
> > Date: Wed, 28 Mar 2001 16:55:18 +0100
> > Resent-From: cisco-nsp@puck.nether.net
> > X-Mailing-List: <cisco-nsp@puck.nether.net> archive/latest/5908
> > X-Loop: cisco-nsp@puck.nether.net
> > Precedence: list
> > Resent-Sender: cisco-nsp-request@puck.nether.net
> >
> > CHeck the OS on the 2900, only the enterprise IOS supports trunks.
> >
> > Cheers
> > Jon
> >
> > > -----Original Message-----
> > > From: Alban Dani [mailto:adani@stevens-tech.edu]
> > > Sent: 27 March 2001 16:02
> > > To: cisco-nsp@puck.nether.net
> > > Subject: [nsp] two vlans in 2900 switches
> > >
> > >
> > > hello there,
> > >
> > > I am using some cat2900 4Mb switches and trying to feed them more then
> > > one vlan
> > > through a cat3500 switch. I know that they do not supports 801.1q
> > > trunking but I was told that you can feed them two uplinks with two
> > > different vlans which later can be assigned to any other port in the
> > > switch
> > >
> > > Any input ?
> > >
> > > Thanks Alban
> > >
> >
> >
> > **********************************************************************
> > COLT Telecommunications
> > Registered in England No. 2452736
> > Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> > Tel. 020 7390 3900
> >
> > This message is subject to and does not create or vary any contractual
> > relationship between COLT Telecommunications, its subsidiaries or
> > affiliates ("COLT") and you. Internet communications are not secure
> > and therefore COLT does not accept legal responsibility for the
> > contents of this message. Any view or opinions expressed are those of
> > the author. The message is intended for the addressee only and its
> > contents and any attached files are strictly confidential. If you have
> > received it in error, please telephone the number above. Thank you.
> >
> >
> > **********************************************************************
> >
> >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT