Thank you,
I figured out how to bring two vlans from the 3500 to the 2900. I am doing
it via two separated uplinks that come from ports configured in the two
vlans ( sw acc vl ) in the 3500. Now all I need is to figure if I can make
one of these vlans a management vlan. I am not sure if the IOS for this 4Mb
2900-s supports it ?!
Alban
"Desmarais, Jonathan" wrote:
> CHeck the OS on the 2900, only the enterprise IOS supports trunks.
>
> Cheers
> Jon
>
> > -----Original Message-----
> > From: Alban Dani [mailto:adani@stevens-tech.edu]
> > Sent: 27 March 2001 16:02
> > To: cisco-nsp@puck.nether.net
> > Subject: [nsp] two vlans in 2900 switches
> >
> >
> > hello there,
> >
> > I am using some cat2900 4Mb switches and trying to feed them more then
> > one vlan
> > through a cat3500 switch. I know that they do not supports 801.1q
> > trunking but I was told that you can feed them two uplinks with two
> > different vlans which later can be assigned to any other port in the
> > switch
> >
> > Any input ?
> >
> > Thanks Alban
> >
>
> **********************************************************************
> COLT Telecommunications
> Registered in England No. 2452736
> Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> Tel. 020 7390 3900
>
> This message is subject to and does not create or vary any contractual
> relationship between COLT Telecommunications, its subsidiaries or
> affiliates ("COLT") and you. Internet communications are not secure
> and therefore COLT does not accept legal responsibility for the
> contents of this message. Any view or opinions expressed are those of
> the author. The message is intended for the addressee only and its
> contents and any attached files are strictly confidential. If you have
> received it in error, please telephone the number above. Thank you.
>
> **********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT